PIRELLI K 185/70-15

240.00 

AN ASYMMETRIC TYRE, FOR DRY OR DAMP/WET SURFACES

Notable steering precision and adherence in traction and braking above all on fast roads, even at low levels of grip. The rigid structure and the dense tread pattern ensure good stability above all in fast cornering characterized by prolonged stress on the tyre. The asymmetric tread pattern ensures excellent performance in traction and braking thanks to the internal blocks. The external blocks facilitate excellent directionality and high lateral grip.
Available in different compounds, according to the characteristics of adherence of the ground and the weather conditions. For the hardest and most severe surfaces the K is available in a “reinforced’’ version. The features of directionality and traction are combined with resistance and integrity thanks to its reinforced structure both in the tread zone and in the sidewalls, which are more resistant to lacerations and cuts.

Kategooria: Silt:

Kirjeldus

PRESSURE
Working pressure values depend on the size of the tyre in relation to the load that it is subjected to. In other words, it will vary according to the type of car, the weight and conditions of use.
In particular, as the weight of the vehicle, speeds and accelerations that the tyre is subjected to increase, the working pressure must be increased. In any case, tyres should not be used at pressures below 1.6 bar.
Using excessively low pressures would bring about the breaking of the tyre due to excess force on the sidewall or unseating from the rim. “Hot” working pressures are usually in the range of 2.2 – 2.5 bar.
Initial inflation pressures vary in order to obtain these values, depending on whether the tyres are preheated or used “cold”. Indeed, preheated tyres can be inflated to slightly lower values than cold tyres.
The difference will depend on the type of heater, the time it remains and the environmental conditions.